California Cannabis Business License Compliance Cultivation Outdoor Large Medicinal M Type 5, 2020 Relevant News, Events, Information & Updates


California Cannabis Cultivators


Frequently Asked Questions

What are the Generator Requirements?

Licensees using generators rated at fifty (50) horsepower and greater shall demonstrate compliance with Airborne Toxic Control Measures. Compliance shall be demonstrated by providing a copy of one of the following to the CalCannabis department upon request:
(1) A Portable Equipment Registration Certificate provided by the California Air Resources Board, or;
(2) A Permit to Operate obtained from the Local Air District with jurisdiction over the licensed premises.
Licensees using generators rated below fifty (50) horsepower shall designate the generator as emergency or low use, meet Tier 3 with level 3 diesel particulate filter requirements, and meet Tier 4 engine requirements.
All generators shall be equipped with nonresettable hour-meters.

What is a Type 1C (Cultivation; Specialty cottage; Small)?

Type 1C, or “specialty cottage,” stands for cultivation using a combination of natural and supplemental artificial lighting at a maximum threshold to be determined by the licensing authority, of 2,500 square feet or less of total canopy size for mixed-light cultivation, up to 25 mature plants for outdoor cultivation, or 500 square feet or less of total canopy size for indoor cultivation, on one premises.

What is a Type 2 (Cultivation; Outdoor; Small)?

Type 2, or “small outdoor,” stands for outdoor cultivation using no artificial lighting between 5,001 and 10,000 square feet, inclusive, of total canopy size on one premises.

What are the required General Environmental Protection Measures?

All licensees shall comply with all of the following environmental protection measures:
Compliance with section 13149 of the Water Code as implemented by the State Water Resources Control Board, Regional Water Quality Control Boards or California Department of Fish and Wildlife.
Compliance with any conditions requested by the California Department of Fish and Wildlife or the State Water Resources Control Board under section 26060.1(b)(1) of the Business and Professions Code.
All outdoor lighting used for security purposes shall be shielded and downward facing.
Immediately halt cultivation activities and implement section 7050.5 of the Health and Safety Code if human remains are discovered.
Requirements for generators pursuant to section 8306 of this chapter.
Compliance with pesticide laws and regulations as enforced by the Department of Pesticide Regulation pursuant to section 8307 of this chapter.
Mixed-light license types of all tiers and sizes shall ensure that lights used for cultivation are shielded from sunset to sunrise to avoid nighttime glare.

What records need to be maintained on the licensed premises?

Department issued cultivation license(s)
Cultivation plan
All records evidencing compliance with the environmental protection measures
All supporting documentation for data or information input into the track-and-trace system;
All UIDs assigned to product in inventory and all unassigned UIDs. UIDs associated with product that has been retired from the track-and-trace system must be retained for six (6) months after the date the tags were retired; Financial records related to the licensed commercial cannabis activity, including but not limited to, bank statements, tax records, sales invoices, and sales receipts; Personnel records, including each employee’s full name, social security, or individual tax payer identification number, date of beginning employment, and date of termination of employment if applicable; Records related to employee training for the track-and-track system or other requirements of this chapter. Records shall include, but are not limited to, the date(s) training occurred, description of the training provided, and the names of the employees that received the training; Contracts with other state licensed cannabis businesses; Permits, licenses, and other local authorizations to conduct the licensee’s commercial cannabis activity; Records associated with composting or disposal of cannabis waste. Documentation associated with loss of access to the track-and-trace system.

What is a Type 2B (Cultivation; Mixed-light; Small)?

Type 2B, or “small mixed-light,” for cultivation using a combination of natural and supplemental artificial lighting at a maximum threshold to be determined by the licensing authority, between 5,001 and 10,000 square feet, inclusive, of total canopy size on one premises.

What are the fines for violations?

For minor violations, the fine range is $100-500.
For moderate violations, the fine range is $501-$1,000.
For serious violations, the fine range is $1,001-$5,000.
For guidance on what constitutes a minor, moderate, or serious violation, refer to our regulations page.

According to the federal Controlled Substances Act, what type of drug is cannabis?

According to the federal Controlled Substances Act, Cannabis is a Schedule I drug.

What is a Type 1 (Cultivation; Specialty outdoor; Small)?

Type 1, or “specialty outdoor,” stands for outdoor cultivation using no artificial lighting of less than or equal to 5,000 square feet of total canopy size on one premises, or up to 50 mature plants on noncontiguous plots.

What is a Type 4 (Cultivation; Nursery)?

Type 4, or “nursery” for cultivation of cannabis solely as a nursery.

What is a Type 3A (Cultivation; Indoor; Medium)?

Type 3A, or “indoor,” stands for indoor cultivation using exclusively artificial lighting between 10,001 and 22,000 square feet, inclusive, of total canopy size on one premises. The Department of Food and Agriculture shall limit the number of licenses allowed of this type.

Do licensees need a nursing license if they propogate immature plants for distribution or seed for distribution to another licnesee.

Yes. Licensees need a nursing license if they propogate immature plants for distribution or seed for distribution to another licnesee.

What does a detailed premises diagram include?

A detailed premise diagram must show all boundaries and dimensions (in feet) of the following areas:
(A) Canopy area(s), including aggregate square footage if the canopy areas are noncontiguous;
(B) Area(s) outside of the canopy where only immature plants shall be maintained, if applicable;
(C) Designated pesticide and other agricultural chemical storage area(s);
(D) Designated processing area(s) if the licensee will process on site;
(E) Designated packaging area(s) if the licensee will package products on site;
(F) Designated composting area(s) if the licensee will compost cannabis waste on site;
(G) Designated secured area(s) for cannabis waste if different than subsection (F) above;
(H) Designated area(s) for harvested cannabis storage;

What is a Type 5A (Cultivation; Indoor; Large)?

Type 5A, or “indoor,” means for indoor cultivation using exclusively artificial lighting greater than 22,000 square feet, inclusive, of total canopy size on one premises.
No Type 5, Type 5A, or Type 5B cultivation licenses may be issued before January 1, 2023.
Commencing on January 1, 2023, a Type 5, Type 5A, or Type 5B licensee may apply for and hold a Type 6 or Type 7 license and apply for and hold a Type 10 license. A Type 5, Type 5A, or Type 5B licensee shall not be eligible to apply for or hold a Type 8, Type 11, or Type 12 license.

What is a Type 1B (Cultivation; Specialty mixed-light; Small)?

Type 1B, or “specialty mixed-light,” stands for cultivation using a combination of natural and supplemental artificial lighting at a maximum threshold to be determined by the licensing authority, of between 2,501 and 5,000 square feet of total canopy size on one premises.

Who can licensees transfer their harvested cannabis to?

Licensees can transfer their harvested cannabis to a licensed processor,, manufacturer or distributor via a licensed distributor.

What type of license needs a Lighting Diagram?

Lighting Diagrams are required for mixed-light types applications (Specialty Cottage, Specialty, Small and Medium).

What are the records and reporting requirements?

Each licensee shall keep and maintain the records listed in subsection (d) for at least seven (7) years from the date the document was created.
Records shall be kept in a manner that allows the records to be provided at the licensed premises or delivered to the department, upon request.

What is a Type 3B (Cultivation; Mixed-light; Medium)?

Type 3B, or “mixed-light,” for cultivation using a combination of natural and supplemental artificial lighting at a maximum threshold to be determined by the licensing authority, between 10,001 and 22,000 square feet, inclusive, of total canopy size on one premises. The Department of Food and Agriculture shall limit the number of licenses allowed of this type.

What are the requirements of a Lighting Diagram?

A Lighting Diagram must include location of all lights in the canopy areas and maximum wattage of each light.

Can Nurseries maintain an area for research and development?

Yes. Nurseries may maintain a research and development area, as identified in their cultivation plan, for the cultivation of mature plants. All mature plants shall be tagged with a UID. All products derived from these plants are prohibited from entering the commercial distribution chain.

What are the Renewable Energy Requirements?

Beginning January 1, 2023, all indoor, tier 2 mixed-light license types of all sizes, and nurseries using indoor or tier 2 mixed-light techniques, shall ensure that electrical power used for commercial cannabis activity meets the average electricity greenhouse gas emissions intensity required of their local utility provider.

What are the Pesticide Use Requirements?

Licensees shall comply with all pesticide laws and regulations enforced by the Department of Pesticide Regulation.
For all pesticides that comply with subsection (a) above and are exempt from registration requirements, licensees shall comply with the following pesticide application and storage protocols:
(1) Comply with all pesticide label directions;
(2) Store chemicals in a secure building or shed to prevent access by wildlife;
(3) Contain any chemical leaks and immediately clean up any spills;
(4) Apply the minimum amount of product necessary to control the target pest;
(5) Prevent offsite drift;
(6) Do not apply pesticides when pollinators are present;
(7) Do not allow drift to flowering plants attractive to pollinators;
(8) Do not spray directly to surface water or allow pesticide product to drift to surface water. Spray only when wind is blowing away from surface water bodies;
(9) Do not apply pesticides when they may reach surface water or groundwater; and
(10) Only use properly labeled pesticides

Are there Sales Invoice or Receipt Requirements?

The licensee shall prepare a sales invoice or receipt for every sale, transport, or transfer of cannabis or nonmanufactured cannabis product to another licensee. Sales invoices and receipts may be retained electronically but must be readily accessible for examination by the department, other state licensing authorities, any state or local law enforcement authority, and the California Department of Tax and Fee Administration.
For complete requirements, refer to our regulations page.

What should be included in a pest management plan?

Product name and active ingredient(s) of all pesticides to be applied to cannabis during any stage of plant growth. Integrated pest management protocols, including chemical, biological and cultural methods the applicant anticipates using to control or prevent the introduction of pests on the cultivation site.

Do applicants need Track-and-Trace Training

Yes. Each applicant shall register for track-and-trace system training provided by the department within ten (10) business days of receiving notice from the department that their application for licensure has been received and is complete. Documentation of training completion shall be provided to the department within ten (10) business days of completion. Applicants approved for an annual license shall not have access to the track-and-trace system until the licensee’s designated account manager has completed, and provided proof of completion, of the track-and-trace training prescribed by the department.

What does a Cultivation Plan require?

Cultivation Plans require: Detailed Premises Diagram, Pest Management Plan, and a Cannabis Waste Management Plan.

What is a Type 2A (Cultivation; Indoor; Small)?

Type 2A, or “small indoor,” stands for indoor cultivation using exclusively artificial lighting between 5,001 and 10,000 square feet, inclusive, of total canopy size on one premises.

What is a Type 5 (Cultivation; Outdoor; Large)?

Type 5, or “outdoor,” means for outdoor cultivation using no artificial lighting greater than one acre, inclusive, of total canopy size on one premises.
No Type 5, Type 5A, or Type 5B cultivation licenses may be issued before January 1, 2023.
Commencing on January 1, 2023, a Type 5, Type 5A, or Type 5B licensee may apply for and hold a Type 6 or Type 7 license and apply for and hold a Type 10 license. A Type 5, Type 5A, or Type 5B licensee shall not be eligible to apply for or hold a Type 8, Type 11, or Type 12 license.

What is a Type 5B (Cultivation; Mixed-light; Large)?

Type 5B, or “mixed-light,” means for cultivation using a combination of natural and supplemental artificial lighting at a maximum threshold to be determined by the licensing authority, greater than 22,000 square feet, inclusive, of total canopy size on one premises.
No Type 5, Type 5A, or Type 5B cultivation licenses may be issued before January 1, 2023.
Commencing on January 1, 2023, a Type 5, Type 5A, or Type 5B licensee may apply for and hold a Type 6 or Type 7 license and apply for and hold a Type 10 license. A Type 5, Type 5A, or Type 5B licensee shall not be eligible to apply for or hold a Type 8, Type 11, or Type 12 license.

What are the flowering requirements?

Cannabis plants maintained outside of the designated canopy area(s) for specialty cottage, specialty, small and medium licenses are prohibited from flowering. Should plants outside of the canopy area(s) begin to flower, a UID shall be applied, the plant(s) shall be moved to the designated canopy area without delay, and reported in the track-and-trace system.

What is the Cannabis Waste Management Requirements?

Among other things, a licensee shall dispose of cannabis waste in a secured waste receptacle or in a secured area on the licensed premises designated on the licensee’s premises diagram and as identified in the licensee’s cultivation plan. For the purposes of this section, “secure waste receptacle” or “secured area” means that physical access to the receptacle or area is restricted only to the licensee, employees of the licensee, or the local agency, a waste hauler franchised or contracted by a local agency, or a private waste hauler permitted by the local agency. Public access to the designated receptacle or area shall be strictly prohibited.
Transportation of self-hauled cannabis waste shall only be performed by the licensee or employees of the licensee.
A licensee shall maintain accurate and comprehensive records regarding cannabis waste that account for, reconcile, and evidence all activity related to the generation or disposition of cannabis waste.

What type of licensees need a Cultivation Plan?

Specialty Cottage, Specialty, Small and Medium licenses need a detailed premises diagram.

Can cultivation licensees make material physical modification of premises?

Cultivation licensees cannot make material physical modifications of the licensed premises if it materially or substantially alters the licensed premise of the use thereof from the premises diagram without prior written approval by the department.

Do plants for seed products need to be tagged with a UID?

Yes, all plants or portions thereof that are used for seed production need to be tagged with a UID.

What are the Cultivation Requirements for Processor Licenses?


(a) All aggregation of product shall adhere to track-and-trace requirements.
(b) Licensees may produce nonmanufactured cannabis products without a manufacturing license, provided compliance with packaging and labeling requirements.
(c) Cultivation of cannabis plants is prohibited at a licensed processor premises.

What is a Type 1A (Cultivation; Specialty indoor; Small)?

Type 1A, or “specialty indoor,” stands for indoor cultivation using exclusively artificial lighting of between 501 and 5,000 square feet of total canopy size on one premises.

What is a Type 3 (Cultivation; Outdoor; Medium)?

Type 3, or “outdoor,” stands for outdoor cultivation using no artificial lighting from 10,001 square feet to one acre, inclusive, of total canopy size on one premises. The Department of Food and Agriculture shall limit the number of licenses allowed of this type.


State Authority & Contact:

CalCannabis Cultivation Licensing (CA Department of Food & Agriculture)
1220 N Street, Sacramento, CA 95814
Phone: 1-833-CALGROW (1-833-225-4769)
Email: calcannabis@cdfa.ca.gov

Scope of Licenses:

Medicinal (M):
  • M-Type 1 (Cultivation; Specialty outdoor; Small)
  • M-Type 1A (Cultivation; Specialty indoor; Small)
  • M-Type 1B (Cultivation; Specialty mixed-light; Small)
  • M-Type 1C (Cultivation; Specialty cottage; Small)
  • M-Type 2 (Cultivation; Outdoor; Small)
  • M-Type 2A (Cultivation; Indoor; Small)
  • M-Type 2B (Cultivation; Mixed-light; Small)
  • M-Type 3 (Cultivation; Outdoor; Medium)
  • M-Type 3A (Cultivation; Indoor; Medium)
  • M-Type 3B (Cultivation; Mixed-light; Medium)
  • M-Type 4 (Cultivation; Nursery)
  • M-Type 5 (Cultivation; Outdoor; Large)
  • M-Type 5A (Cultivation; Indoor; Large)
  • M-Type 5B (Cultivation; Mixed-light; Large)

Adult-Use Recreational (A):
  • A-Type 1 (Cultivation; Specialty outdoor; Small)
  • A-Type 1A (Cultivation; Specialty indoor; Small)
  • A-Type 1B (Cultivation; Specialty mixed-light; Small)
  • A-Type 1C (Cultivation; Specialty cottage; Small)
  • A-Type 2 (Cultivation; Outdoor; Small)
  • A-Type 2A (Cultivation; Indoor; Small)
  • A-Type 2B (Cultivation; Mixed-light; Small)
  • A-Type 3 (Cultivation; Outdoor; Medium)
  • A-Type 3A (Cultivation; Indoor; Medium)
  • A-Type 3B (Cultivation; Mixed-light; Medium)
  • A-Type 4 (Cultivation; Nursery)
  • A-Type 5 (Cultivation; Outdoor; Large)
  • A-Type 5A (Cultivation; Indoor; Large)
  • A-Type 5B (Cultivation; Mixed-light; Large)

Requirements:

  • Cultivation Plan: Detailed Premises Diagram (for Specialty Cottage, Specialty, Small and Medium licenses)
  • Legal Right to Occupy
  • Property Diagram
  • Any Water Source Information
  • Identification of Cannabis Waste Management Plan
  • Applicant Track and Trace Training
  • Proof of Local License, Permit, or Other Authorization
  • Disclosure of any substantially related offenses
  • Each entity shall obtain a separate license for each premises that engages in commercial cananbis cultivation
  • License shall be prominently displayed on premises
  • Seed Production Compliance(for Nurseries)
  • Research and Development Compliance (for Nurseries)
  • Environment Protection Measures
  • Renewable Energy Compliance
  • Generator Compliance
  • Pesticide Compliance
  • Cannabis Waste Compliance
  • Track-and-Trace Sytem Compliance
  • Record Retention
  • Cooperation with any Inventory Audits
  • Inspections Compliance
  • Notification of Theft, Lost, Diversion, or Criminal Activity
  • Bureau's Sample Collection in event of transfer
  • Packaging and Labeling Compliance
  • Weighing Device Compliance
  • If applicable, liense issuance in Impacted Watershed
  • Disclosre of Owners and Financial Interest Holders
  • Sales Invoice or Receipt
  • And More...

Application and Licensing Fees:

Application Fees:
  • Specialty Cottage Outdoor $135
  • Specialty Cottage Indoor $205
  • Specialty Cottage Mixed-Light Tier 1 $340
  • Specialty Cottage Mixed-Light Tier 2 $580
  • Specialty Outdoor $270
  • Specialty Indoor $2,170
  • Specialty Mixed-Light Tier 1 $655
  • Specialty Mixed-Light Tier 2 $1,125
  • Small Outdoor $535
  • Small Indoor $3,935
  • Small Mixed-Light Tier 1 $1,310
  • Small Mixed-Light Tier 2 $2,250
  • Medium Outdoor $1,555
  • Medium Indoor $8,655
  • Medium Mixed-Light Tier 1 $2,885
  • Medium Mixed-Light Tier 2 $4,945
  • Nursery $520
  • Processor $1,040

Licensing Fees:
  • Specialty Cottage Outdoor $1,205
  • Specialty Cottage Indoor $1,830
  • Specialty Cottage Mixed-Light Tier 1 $3,035
  • Specialty Cottage Mixed-Light Tier 2 $5,200
  • Specialty Outdoor $2,410
  • Specialty Indoor $19,540
  • Specialty Mixed-Light Tier 1 $5,900
  • Specialty Mixed-Light Tier 2 $10,120
  • Small Outdoor $4,820
  • Small Indoor $35,410
  • Small Mixed-Light Tier 1 $11,800
  • Small Mixed-Light Tier 2 $20,235
  • Medium Outdoor $13,990
  • Medium Indoor $77,905
  • Medium Mixed-Light Tier 1 $25,970
  • Medium Mixed-Light Tier 2 $44,517
  • Nursery $4,685
  • Processor $9,370

Forms:


Video Guide:

Temporary License Application


Annual License Application

Resources:








California Universal Symbol for Cannabis


California Universal Symbol for Cannabis

Download PNG file or Download JPG file



This site focuses or refers to information and services regarding cannabis cultivation licensing MCSB’s temporary license application Temporary Cannabis Event cannabis event organizer license protocol small product packaging 2020 recent news product as a candy prohibited commercial cannabis manufacturing in California online licensing system Microbusiness amount of THC/CBD per serving and per package property for the commercial cannabis activity consumption of alcohol or tobacco microbusinesses Mycotoxins Testing transporting cannabis goods Manufactured Cannabis Safety Branch CO2 and ethanol extractions required limits diagram of the business’s layout track and trace system operating premises valid waiver labeling A-license and an M-license for the same commercial cannabis activity edible products 2020 regulations at least 20% ownership interest activity for a period of 120 days child-resistant packaging 2020 resolutions exit packaging waste disposal volatile solvent Cannabinoids Testing Department of Food and Agriculture’s CalCannabis Cultivation Licensing division shared-use manufacturing facilities Microbial Impurities Testing (A. fumigatus, A. flavus, A. niger, A. terreus) unique ID/batch number commercial cannabis manufacturers delivery vehicle $3,000 of cannabis goods final form ISO/IEC 17025 accreditation ANTICIPATED ANNUAL (NONTEMPORARY) LICENSE APPLICATION REQUIREMENTS opaque exit package recordkeeping comply with all packaging and labeling requirements cannabis waste Bond in the amount of $5,000 M-licensees CDPH-9041 Arranging for laboratory testing packaging and labeling requirements stickers cannabis adult-use products Local Jurisdictions CalCannabis Cultivation Licensing disposal licensed cannabis manufacturers license review process The California Department of Public Health's conditional license public health and safety state cannabis licensing 2020 fines cannabis training Business and Professions Code section 26050.1 manufacturer's name Heavy Metals Testing paper inserted into the packaging no added caffeine cannabis industries sanitary workplaces extracts Percentage of ownership regulatory framework scaled to the gross annual revenue of the licensed premises manufacturing activities Distributor transport equity interest in a commercial cannabis business Business Organizational Moisture Content Testing A-license and an M-license written procedures for inventory control Licensee Information carbohydrates and fat per serving Medicinal and Adult-Use Cannabis Regulation and Safety Act transportation of cannabis goods Manufactured Cannabis Safety Branch (MCSB) topicals Physical address loan provided to a commercial cannabis business 2020 proposed changes California Public Records Act emergency regulations three cannabis licensing authorities Category I Residual Pesticides Testing Financial Interest local jurisdiction secondary packaging Industrial Hemp Advisory Board testing of cannabis goods secured area child-resistant outer package manufacturers who package for other producers exception for testing laboratories licensed physical location (premises) tobacco products ownership premises is not within a Government secondary package surety bond persons with a financial interest in the cannabis business product guidelines infusion manufacturing (Level 1 manufacturing, Type 6) Licensee Lookup Tool good manufacturing practices meat and seafood, and other products health claims member manager Department of Public Health’s Manufactured Cannabis Safety Branch 2020 revisions concentrate Conducting quality assurance review of cannabis goods Retailer (nonstorefront) CDPH-issued universal symbol Cannabis Manufacturing A-licensees medicinal and adult use cannabis goods transported together Medical Cannabis Regulation and Safety Act of 2015 MCSB quality control Type S share facility space highly-concentrated THC/CBD such as oil, wax and resin manufacturing periods of 90 days extensions regulations for medicinal and adult-use cannabis testing methods 2020 issues 2020 problems Proposed Section 40133 disposal and destruction methods tamper-evident M-license Seller’s permit number vape cartridges Carbon Dioxide (CO2) commercial cannabis products designated structure retailers compliance with regulations capsules Proposition 64: The Adult Use of Cannabis Act of 2016 Extractions using CO2 at least 99% purity cannabis products in container or wrapper for sale Office of Environmental Health Hazard Assessment (OEHHA) re-sealable destruction of cannabis goods must enter certain events health impacts of cannabis regulations for medical and adult-use cannabis in California ingredient list evidence of rehabilitation Incorporating THC/CBD concentrates adult-use commercial cannabis activity managing member some nutritional facts commercial cannabis activity requiring refrigeration Financial information The Bureau of Cannabis Control (BCC) licensing cannabis third-party testing laboratories contaminant free Vehicle Requirements Completed Temporary License Application Form cannabis plants Identifying information financial interest holder California Department of Public Health 2020 compliance Non-Storefront Retailer (Type 9) Labor peace agreement The Manufactured Cannabis Safety Branch (MCSB) packaging and labeling basic nutritional information Butane/Hexane/Propane Business Information local jurisdiction authorization medicinal and adult-use or both markets mandated warning statements highly-concentrated oils or waxes chain of custody limited to a maximum of 1,000 mg per package transport cannabis goods to retailer loop system storage of cannabis goods Food-grade Butter/Oil cannabis market no infusion of alcohol Temporary License Application three state cannabis-licensing authorities limited to a maximum of 10 mg of THC per serving 2020 updates 600-foot radius of a school no infusion of nicotine pre-made or purchased licensing scheme potentially-hazardous foods inventory packaging allergen information laboratory quality assurance Ethanol annual license application LICENSE APPLICATION REQUIREMENTS commercial kitchens 2,000 mg of THC per package for the medicinal-use market licensed cannabis cultivators transportation and security Live Scans for each owner edibles packaging opaque Transport vehicles alarm system medicinal and adult-use commercial cannabis activity medicinal and adult-use markets primary panel requirements purchasing cannabis products on tribal lands Department of Consumer Affairs’ Bureau of Cannabis Control 100 mg of THC per package alcoholic beverages tinctures Premises Information Category I Residual Solvents and Processing Chemicals Testing shares of stock that are less than 5% of the total shares in a publicly traded company evidence of the legal right to occupy the premises Category II Residual Solvents and Processing Chemicals Testing contaminants 2020 new laws extraction persons 21 years of age or older Edibles– Products temporary license Local Authorization Attachment conducting quality assurance review immature live plants and seeds being transported from a licensed nursery Proposition 65 Cultivation less than 10,000 Local Authorization supplemental label cultivation (on an area less than 10,000 square feet) sampling standards hydrocarbon-based solvents CALIFORNIA BUREAU OF CANNABIS CONTROL shaped like a human, animal, insect, or fruit Category II Residual Pesticides Testing certified by a California-licensed engineer aggregate interest of 20% or more investment into a commercial cannabis business labels not be attractive local jurisdiction’s requirements manufacturing practices CDTFA seller’s permit Premises Diagram MANUFACTURED CANNABIS SAFETY BRANCH cultivation Licensees remove THC/CBD access to the area(s) Temporary event up to 4 days Owner Bond and Insurance Information list of artificial food colorings licenses for both medicinal and adult-use cannabis manufacturing at the same premises Microbial Impurities Testing (Escherichia coli and Salmonella spp.) supply chains for medicinal and adult-use cannabis products motor carrier permit payable to the state of California minimum standards for extraction processes Foreign Material Testing licensed cannabis distributors procedures for inventory control A-license licensing cannabis retailers product formulation Application Checklist Distributor Transport Only manufacturing cannabis products the commercial medicinal and adult-use (recreational) 2020 important information local jurisdiction’s ordinances and regulations supply chain THC levels sanitary and hazard-free environment informational panel structure and formation documents finished product manned motor vehicle licensing cannabis distributors sales of cannabis goods Water Activity Testing of Solid or Semi-Solid Edibles definition of owner Transition Period inventory and quality control Standard Operating Procedures (SOPs) Premises diagram entry into the legal, regulated market sugar compliance with local jurisdiction Temporary License Application Information dried flower licensing and regulating commercial cannabis manufacturers period of 120 days cannabis sales and/or consumption onsite consumption of cannabis goods Criminal History Mechanical shipping manifest Track and Trace Medicinal and Adult-Use Cannabis Regulation and Safety Act (MAUCRSA) Retailer (Type 10) licensed premises cannabis cartoons inhalable cannabis testing laboratories BUREAU OF CANNABIS CONTROL packaging and labeling requirements for pre-rolls onsite sale and consumption of cannabis goods licensing cannabis microbusinesses 120 days disclosure of all criminal convictions Manufacturing (non-volatile) 600 foot radius of a school transportation Manufactured Cannabis Licensing System (MCLS) an officer or director of a cannabis business hang tag or a peel-back label Homogeneity Testing of Edible Cannabis Products manufacture cannabis products identity of the product government warning statement label security Poison Prevention Packaging Act of 1970 (PPPA) nonlaboratory quality control operating procedures Form # CDPH-9041 amount of sodium distributors premises diagram workshops hosted by the Bureau of Cannabis Control public Licensee Lookup Tool California Department of Public Health (CDPH) waste management laws Personnel Requirements Local Issuing Authority commercial cannabis manufacturing amount of THC content 2020 laws Water/Food-grade Dry Ice Fingerprints medicinal and adult-use cannabis manufacturing convicted of a substantially related crime testing lab Operating Procedures medicinal commercial cannabis activity separate applications security and cannabis waste disposal commercial cannabis manufacturing activity Terpenoids Testing Individual Owner and more.

In addition, Type 9 (Non-Storefront Retailer) Small Mixed-Light Tier 2 Monitor Mixed-light cultivation Medium Outdoor Pest Type 1 (Cultivation; Specialty outdoor; Small) Pathogen CBD from industrial hemp Specialty Cottage Mixed-Light Tier 2 Topical cannabis product Type N – for infusions Cultivation Wet weight DPH-17-010E Type 5A (Cultivation; Indoor; Large) Verification alternate use of a manufacturing premises M-license Type P – for packaging and labeling only Type 6 (Manufacturer 1) Extraction: Non-volatile Solvents, Mechanical Methods Quarantine adulteration Batch Mixed-light Tier 2 Type 1B (Cultivation; Specialty mixed-light; Small) Request for Live Scan Canopy Actual yield Edible cannabis product Preventive controls package flower or pre-rolls Type S (coming soon, shared-use manufacturing facilities) Track-and-trace systems CBD Unique identifier Primary panel Premises Raw material Immature plant Small Indoor Kief Ingredient Applicant Mature plant Finished product Department Nursery Product Identity Volatile solvent Track and trace system Type 13 (Distributor Transport Only) Type 5 (Cultivation; Outdoor; Large) Component Mixed-light Tier 1 list of cannabis manufacturers Lot Type 14 (Cannabis Event Organizer) Quality control operation Type N Infusions (optional packaging and labeling) Harvest Batch cakes, cookies, beverages and juices, tea and coffee, chocolates, gummies, gum, and mints products similar to traditional food products prohibited infused butters and oils as concentrates Holding Commercial cannabis activity cannabis concentrates Type 5B (Cultivation; Mixed-light; Large) Bureau Cultivation site Distribution Package Hazard Specialty Indoor Specialty Cottage Outdoor UID Type 11 (Distributor) gross annual revenue for first year in operation under MAUCRSA Dried flower Type 2 (Cultivation; Outdoor; Small) Nonvolatile solvent Theoretical yield Type 3A (Cultivation; Indoor; Medium) Type 2B (Cultivation; Mixed-light; Small) track and trace system Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane) Extraction Type 2A (Cultivation; Indoor; Small) Processing Type 3 (Cultivation; Outdoor; Medium) THC limit of 10 milligrams per serving and 100 milligrams per package Proposition 65 warning statement Outdoor cultivation Flowering Watts per square foot Personnel Specialty Cottage Mixed-Light Tier 1 Adulterated Limited-access area Quality Small Mixed-Light Tier 1 Small Outdoor Universal symbol Medium Mixed-Light Tier 1 Environmental pathogen infused pre-rolls Type 10 (Retailer) Qualified individual Manufacturer licensee Specialty Mixed-Light Tier 2 Type 4 (Cultivation; Nursery) Processor Type P Packaging & Labeling Only Type 1A (Cultivation; Specialty indoor; Small) Sanitize Type 1C (Cultivation; Specialty cottage; Small) Net weight Medium Indoor Nonmanufactured cannabis product Allergen cross-contact Microorganisms Indoor cultivation THC Informational panel Commercial-grade, non-residential door lock Adequate In-process material Specialty Outdoor Contact surface Licensee Allergen Process Serving Type 8 (Testing Laboratory) Type 12 (Microbusiness) Adult-use Market Cannabis product Pre-roll Processing aid Specialty Cottage Indoor Validation Manufacture Quality control personnel MCSB 90-day extension periods Labeling Specialty Mixed-Light Tier 1 Medium Mixed-Light Tier 2 Type 7 (Manufacturer 2) Extraction: Volatile Solvents Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter) Type 3B (Cultivation; Mixed-light; Medium) Infusion and more.


Disclaimer: Informational and educational purposes. Self-help services (not legal advice). Site is not affiliated with any state agency. Note that site might not contain the most updated information. Your receipt of any information from this site does not create a relationship. Prior results do not guarantee or suggest a similar result in other matters. No promise is made with regard to services or content's reliability, availabilty, or ability to meet any needs. Information and services provided "AS IS."

Green Trusted
All Rights Reserved